





200 lumen outputs·RGBW
▪ Max run length up to 16.4ft (5m) from single power feed
▪ Field cuttable & joinable
▪ Low voltage DC24V
▪ 200 lumen outputs
▪ IP20 rated, ideal for indoor uses
▪ 5 years warranty
Series: BELA
Temp./Color | 4.39W/ft |
R | 30 |
G | 75 |
B | 21 |
W30 | 69 |
RGBW30 | 186 |

0.57'' x 0.57'', Surface
- Standard length is 3.28ft./pcs
- Included 3.28ft cover, 2 pcs end caps, 4 pcs mounting clips
- Consult factory for customization

0.71'' x 0.71'', Angled
- Standard length is 3.28ft./pcs
- Included 3.28ft cover, 2 pcs end caps, 4 pcs mounting clips
- Consult factory for customization

0.62'' x 0.59'', Mud-in
- Standard length is 3.28ft./pcs
- Included 3.28ft cover, 2 pcs end caps
- Consult factory for customization

96W/150W/200W/300W, UL-listed, 24V
• Dimming options: DMX512
• Constant Voltage Driver
• Input Voltage: 100-277VAC
• Slightly adjustable output voltage
• Built-in active PFC
• RDM (Remote Device Management)
• Protection: short circuit/over load/over heat
• Dry/damp/wet locations
• Flicker-free
• 0-100% dimmable
• Read and write DMX512 address or fine-tune output voltage with mobile ProNFC app or special NFC device

30W/60W/96W/150W/200W/300W, UL-listed, 24V
• Non-dimmable
• UL-listed
• Constant Voltage Driver
• Universal Input: 100-277VAC
• Protection: short circuit/over load/over heat

IP20/IP54, 2P/5P/6P, 10/12mm in width

IP20/IP54, 2P/5P/6P, 10/12mm in width

IP20, 2/3/4/5 pin

IP44

Stronger stickiness
• Available in 8mm, 10mm, 12mm, 14mm width
• VHB 3M adhesive back tape with stronger stickiness